Conforming Meter List
The
Market Rules require each metering installation that is used for
settlement purposes in the IESO-administered markets to contain meters that are of
a type described on the list of conforming meters established by the IESO.
The Conforming Meter List is the list of meters that are
permitted to be used as the "main" or "alternate" meter, as the case may be, in
metering installations provided that all applicable conditions of acceptance as
noted are met in respect of a given meter. The IESO standard Wholesale Revenue
Metering Standard - Hardware contains a description of the functions for each of
the "main" and "alternate" meters that must form part of a metering installation,
and the Market Rules and the policies and standards established by the IESO, including
the IESO standard Wholesale Revenue Metering Standard – Hardware, describe the accuracy
and other requirements for meters and metering installations.
In addition to other requirements, the Meters included on the list have been sample
tested by the IESO to verify that the meters are by design compatible with the IESO's
metering communication facilities and software when the conditions of acceptance noted
are met.
Metered Market Participants and Metering Service Providers are solely responsible
for ensuring that their metering installations comply in all respects with the
applicable provisions of the Market Rules and of any policy or standard established
by the IESO pursuant to the Market Rules, including as to sealing by an accredited meter
verifier and as to containing meters obtained from a manufacturer that has obtained
approval of type from Measurement Canada.
Inclusion of a meter on the Conforming Meter List attached does not represent or
warrant that any individual meter is accurate or complies fully with the requirements
of the Market Rules or of any such policy or standard. The IESO reserves the
right to:
- refuse registration of a metering installation in the event of non-compliance with the Market Rules or any such policy or standard; and
- take such other action as may be permitted by the Market Rules in respect of a non-compliant metering installation
even if the metering installation contains meters that are on the list attached.
Below for information purposes only and as a convenience for Metered Market
Participants and Metering Service Providers, is a list of contact information for
manufacturers or suppliers of meters contained on the Conforming Meter List.
Last Updated: January 8, 2010
| Meters Conforming to the Requirements of the IESO Market |
| Elster Metering |
Make
Model
Firmware Version
Market Category
Date Listed
Conditions of Acceptance |
(1) ALPHA Plus
(1) A1RLQ+ and A1RL+
(1) 2.3 (2) 2.4 (3) 2.7
Alternate
(1) March 20, 2000 (2) February 9, 2004 (3) August 3, 2006
None. 2 wire accepted for 1-phase service.
|
| Elster Metering |
Make
Model
Firmware Version
Market Category
Date Listed
Conditions of Acceptance |
ALPHA
A3RL
3.03
Alternate
March 26, 2008
None
|
| Elster Metering |
Make
Model
Firmware Version
Market Category
Date Listed
Conditions of Acceptance
|
ION
(1) 8300 (2) 8400 (3) 8500
(1) 8300V232 (2) 8400V232 (3) 8500V232
Main and Alternate
August 6, 2003
None. 2.5 element accepted for missing V2h.
Note: Identical to PML Models 8300, 8400 and 8500 with same firmware. |
| GE Canada Inc. |
Make
Model
Firmware Version
Market Category
Date Listed
Conditions of Acceptance |
GE
(1) KV2 (2) KV2c
(1) 1.2 (2) 1.3
Alternate
July 7, 2004
None |
| Schneider Electric/PML |
Make
Model
Firmware Version
Market Category
Date Listed
Conditions of Acceptance |
ION
(1) 8300 (2) 8400 (3) 8500
(1) 8300V232 (2) 8400V232 (3) 8500V232
Main and Alternate
August 6, 2003
None. 2.5 element accepted for missing V2h. |
| Schneider Electric/PML |
Make
Model
Firmware Version
Market Category
Date Listed
Conditions of Acceptance |
ION
(1) 8300 (2) 8400 (3) 8500
(1) 8300V261 (2) 8400V261 (3) 8500V261
Main and Alternate
November 7, 2005
None. 2.5 element accepted for missing V2h. |
| Schneider Electric/PML |
Make
Model
Firmware Version
Market Category
Date Listed
Conditions of Acceptance |
ION
(1) 8300 (2) 8400 (3) 8500
(1) 8300V262 (2) 8400V262 (3) 8500V262
Main and Alternate
November 7, 2005
None. 2.5 element accepted for missing V2h. |
| Schneider Electric/PML |
Make
Model
Firmware Version
Market Category
Date Listed
Conditions of Acceptance |
ION
(1) 8300 (2) 8400 (3) 8500
(1) 8300V281 (2) 8400V281 (3) 8500V281
Main and Alternate
May 1, 2008
None. 2.5 element accepted for missing V2h. |
| Schneider Electric/PML |
Make
Model
Firmware Version
Market Category
Date Listed
Conditions of Acceptance |
ION
8600 (25 Hz)
8600V311
Alternate
May 1, 2008
kWh only; uni-directional power flow; kVarh, V2h & I2h precluded; 2.5 element precluded |
| Schneider Electric/PML |
Make
Model
Firmware Version
Market Category
Date Listed
Conditions of Acceptance |
ION
8600
8600V311
Main and Alternate
April 11, 2006
None. 2.5 element accepted for missing V2h. |
| Schneider Electric/PML |
Make
Model
Firmware Version
Market Category
Date Listed
Conditions of Acceptance |
ION
8600
8600V321
Main and Alternate
July 23, 2006
None. 2.5 element accepted for missing V2h. |
| Itron Canada |
Make
Model
Firmware Version
Market Category
Date Listed
Conditions of Acceptance |
QUANTUM
Q1000
2.0
Alternate
March 31, 2000
Version 2.0 may not be used as Main |
| Itron Canada |
Make
Model
Firmware Version
Market Category
Date Listed
Conditions of Acceptance |
QUANTUM
Q1000
3.03a
Main and Alternate
December 21, 2000
None |
| Itron Canada |
Make
Model
Firmware Version
Market Category
Date Listed
Conditions of Acceptance |
QUANTUM
Q1000
4.01i
Main and Alternate
May 22, 2001
None |
| Itron Canada |
Make
Model
Firmware Version
Market Category
Date Listed
Conditions of Acceptance |
QUANTUM
Q1000 with RS485
4.01i
Main and Alternate
May 3, 2002
Version 2.0 & 3.03a do not qualify |
| Itron Canada |
Make
Model
Firmware Version
Market Category
Date Listed
Conditions of Acceptance |
QUANTUM
Q1000
5.01c
Main and Alternate
June 10, 2002
None |
| Itron Canada |
Make
Model
Firmware Version
Market Category
Date Listed
Conditions of Acceptance |
QUANTUM
Q1000
5.01m
Main and Alternate
March 21, 2003
None |
| Itron Canada |
Make
Model
Firmware Version
Market Category
Date Listed
Conditions of Acceptance |
SENTINEL
SENTINEL
(1) 2.050 (2) 2.053 (3) 2.070 (4) 3.21 (5) 5.0 (6) 5.02
Alternate
(1) February 3, 2003 (2) May 26, 2003 (3) November 11, 2003 (4) July 22, 2004 (5) November 7, 2005 (6) December 3, 2007
May not daisy-chain meters utilizing phone-line sharing; Requires internal modem option. |
| AMETEK/Scientific-Columbus |
Make
Model
Firmware Version
Market Category
Date Listed
Conditions of Acceptance
|
AMETEK
JEMStar
04.02.01
Main and Alternate
March 4, 2008
Main meter must have Extended Memory functionality
|
The following list specifies the first character of the internal identification
number (device I.D.) assigned for each meter manufacturer. When programming meters, these conventions must be followed for all accepted meters on the
Conforming Meter List.
| Meter Manufacturer |
Assigned Character |
| Elster Metering and ex-ABB |
A |
| GE Canada Inc. |
G |
| Schneider Electric/PML |
P |
| Itron Canada, ex-SchlumbergerSema and ex-Schlumberger |
S |
| AMETEK/Scientific-Columbus |
J |
Supplier contacts are provided for information purposes and convenience only and may not be current beyond April 30, 2009.
| Meter Manufacturer Supplier Contact Information
|
|---|
| Manufacturer/Agent | Contact Name | Telephone/Email | Website |
|---|
Elster Metering
1100 Walker's Line,
Suite 101
Burlington, Ontario
L7N 2G3 |
Clarence Batterink
Product Manager
Electricity Metering |
(905) 634-4895
Ext 104
clarence.e.batterink@
ca.elster.com
|
elstermetering.com |
GE Canada Inc.
2300 Meadowvale Boulevard
Mississauga, Ontario
L5N 5P9
| Ray Murphy
Account Manager |
(905) 858-5346
ray.murphy@
indsys.ge.com |
geindustrial.com |
Schneider Electric/Power Measurement Limited (PML)
Agent: Langford & Associates Inc.
2175 Sheppard Avenue East, Suite 203
Willowdale, Ontario
M2J 1W8 |
Eric Langford, P.Eng.
Manufacturer Representative |
(416) 490-6546
eric@langford-
assoc.com |
global.powerlogic.com/?setCountry=CA |
Itron Canada
6507 Mississauga Road, Unit C
Mississauga, Ontario
L5N 1A6 |
Chris Gardiner
Client Service Manager |
(416) 436-3361
chris.gardiner@
itron.com |
www.itronmeters.com |
AMETEK/Scientific Columbus
Agent: Willer Engineering Limited
422 Consumers Road
Toronto, Ontario M2J 1P8
|
Keith Richardson,
P.Eng.
Manufacturer Representative |
(416) 499-4421
keith.richardson@
willereng.com
|
www.ametekpower.com |
If you have any questions please contact the IESO:
Tel: (905) 403-6900 or 1-888-448-7777
Fax: (905) 403-6921
Email: customer.relations@ieso.ca
Disclaimer
The contents of these materials are provided "as is" without any warranties of any
kind and the Independent Electricity System Operator (IESO) makes no representation
and disclaims all express and implied warranties and conditions of any kind, including
without limitation, representations, warranties or conditions regarding accuracy,
timeliness, completeness, non-infringement, merchantability or fitness for any
particular purpose and the IESO assumes no responsibility to you or any third party
for the consequences of any errors or omissions. The IESO is not liable to the reader
of these materials for any revisions of these materials or to any third party for any
damages of any kind arising out of or relating to the use of this material including,
but not limited to, any lost profits, lost opportunities, special, incidental,
indirect, consequential or punitive damages, even if the IESO is advised of such
possibility. These are conditions of access to these materials. This disclaimer
is subject to the Market Rules made pursuant to the Electricity Act, 1998.
About The IESO
